DSP ( Digital Signal Processor) based design for more reliability with SMT technology
Pure Sine Wave Output wave form same as Mains/ Grid Power
ASIC (Auto Sense Intelligent Control) technology for battery charging
Tri Colour LCD display for better user interface
Yellow Colour – For Operation is in Back-up mode
Green Colour – For Operation is in Charging Mode
Red Colour – For any Protection
Dual State of Charging
Noiseless Operation
Change Over Time Mains to UPS and vice versa < 10 msec
Warranty
24 Month Warranty
Specifications
HF00-SNPROAL700
Output Wave Form
Pure Sine Wave
No Load Output Voltage
220V ± 7V AC
Output Frequency
50Hz ± 1Hz
No Load Battery Current
≤ 2.0 AMP
≤ 1.2 AMP
Full Load Output Current ± 1Amp
59 AMP
46 AMP
64 AMP
105 AMP
49 AMP
56 AMP
49 AMP
59 AMP
Total Harmonics Distortion (@ Linear Load)
< 3%
Battery Low Pre-Alarm
10.8V ≤ 0.2V / Battery (12V DC of each battery)
Battery Low Cut Off
10.5V ≤ 0.2V / Battery (12V DC of each battery)
Mains Mode
Max. Charging Current (HC)
15A ± 1A
15A ± 1A
15A ± 1A
22A ± 1A
15A ± 1A
18A ± 1A
18A ± 1A
18A ± 1A
Max. Charging Current (NC)
12A ± 1A
12A ± 1A
12A ± 1A
18A ± 1A
12A ± 1A
14A ± 1A
14A ± 1A
14A ± 1A
Boost Charging Voltage
14.4V ≤ 0.2V / Battery (12V DC of each battery)
Float Charging Voltage
13.7V ≤ 0.2V / Battery (12V DC of each battery)
Mains Mode (Normal Mode)
Input Voltage Range ± 10V
100V – 280 V
Changeover Time (Mains to Backup)
< 40 ms
Mains Mode (UPS Mode)
Input Voltage Range ± 10V
180V – 260V
Changeover Time (Mains to Backup)
< 10 ms
Changeover Time (Backup to Mains)
< 10 ms
Other Features
Protection
Short Circuit Trip, Overload Trip, Battery Low and Over Charge Protection, Over Temperature Protection, MCB Trip Protection, Phase Reverse Protection
Display
Tri Colour LCD Display which is showing: Mains Voltage, Battery Voltage, Applied Load in % Battery Charging/Charged, Battery Low/Over Charge, Short Circuit, Overload, Over Temperature
